Libera Digit 500
Powered by INSTRUMENTATION TECHNOLOGIES
• 4 channels sampled at 500 MS/s with 14-bit ADCs • AC coupled and DC coupled versions • 31 dB variable gain, more than 90 dB dynamic range • Different buffer acquisition modes with configurable segmented buffer • Python, Matlab, LabVIEW, EPICS and Tango compatible • Passive cooled, PoE++ compatible
Logic Analyzer Extension Module
Power supply for SIGNALlab 250-12
24V 1A Interchangeable Plug Power Adapter
Interchangeable plugs: with country specific US,EU,UK,AU
Typical output : 24V
Power : 24W continuous
Rated Input: 100-240 Vac, 50/60Hz, 0.65A Max
Protection Class: II
Degree of Protection: IP20
Test Standards: CE EN 55032:2015, EN 55014-1:2006, +A1:2009, +A2:2011, EN 55024:2010, +A1:2015, EN 55014-2:2015, EN55020:2007, +A11:2011, EN 61000-3-2:2014, EN 61000-3-3:2013, EN62368-1:2014, 47 CFR FCC Part 15, UL62368-1.
Red Pitaya Click Shield
Red Pitaya Click Shields provide an enhanced set of tools for expanding the versatility of your favourite “Swiss Army Knife for engineers”, allowing you to connect up to two MIKROE Click Boards directly to the Red Pitaya. Bolster your projects with high-resolution ADC, GPS module, LoRa connectivity, or an LCD screen, connect and synchronize clock and trigger signals over multiple devices, or power your Red Pitaya using an industrial power supply.
The brand-new Red Pitaya Click Shield provides all of the above and much more with:
- Two mikroBUS™ sockets, allowing interface with more than 1500 MIKROE Click board™ devices.
- High-performance clock and trigger synchronization between multiple Red Pitaya units.
- Powering Red Pitaya through an external power supply (12-24 V or via USB-C connector)
- Red Pitaya Click Shield
- 3x ULF to ULF cable for trigger and clock synchronization
Red Pitaya Wi-Fi Dongle
The WiFi dongle is compatible with STEMlab 125-10, STEMlab 125-14, SDRlab 122-16, and SIGNALlab 250-12. It is also compatible with the latest version of Red Pitaya’s official OS.
Note that the dongle will only enable your Red Pitaya unit to connect to other WiFi networks, and the ability to establish its own network/access point is not available yet.
It has improved connection stability and range, plus higher speed (40-50Mbits/s).
It comes with an RP-SMA detachable antenna, which allows you to extend it with a cable for better antenna positioning.
Caution: do not use the WiFi dongle without the antenna connected.
SDRlab 122-16
SDRlab 122-16 was developed specifically for software-defined radio and more demanding RF applications.
It comes with two 16-bit 50-ohm inputs and 14-bit 50-ohm outputs, Xilinx Zynq 7020 FPGA for real-time processing capabilities plus an ultra-low phase noise 122.88MHz clock which makes it more hardware-compatible with HPSDR compliant applications. RF inputs are optimized for minimal distortion, noise and crosstalk which significantly improves reception and broadens the choice of antenna.
SDRlab 122-16 External Clock Standard Kit
CAUTION: This board needs an external clock signal 122.88MHz in order to boot and function!
SDRlab 122-16 External Clock is based on the SDRlab 122-16 digitizer model that is modified to be used with an external clock oscillator, which is important, especially for RF applications that operate at other frequencies and may require higher accuracy clock or synchronization.
With this modification, users can provide their own clock for the Red Pitaya device through the E2 extension connector.
External clock modification advantages:
– Tailored for SDR & other RF applications, HF and 50MHz bands
– No DC coupling! minimum RF Input frequency (-3dB): 300kHz
– Comes with two 16-bit ADC 50 ohm inputs; 14-bit DACs 50 Ohm outputs
– Three times bigger dual-core ARM Cortex A9 + Xilinx Zynq 7020 FPGA
– Bigger FPGA provides more real-time processing capabilities
– Hardware compatible with HPSDR
– Improved distortions, dynamic range, sensitivity, noise & crosstalk
SDRlab 122-16 Standard Kit
SDRlab 122-16 Standard Kit
Introducing the SDRlab 122-16 Standard Kit, an affordable and versatile open-source digitizer designed for creating your own SDR transceiver. This kit combines FPGA and CPU technology, offering a perfect blend of real-time processing and CPU flexibility. SDRlab 122-16 was developed specifically for software-defined radio and more demanding RF applications. It comes with two 16-bit 50-ohm inputs and 14-bit 50-ohm outputs, Xilinx Zynq 7020 FPGA for real-time processing capabilities plus an ultra-low phase noise 122.88MHz clock which makes it more hardware-compatible with HPSDR compliant applications. RF inputs are optimized for minimal distortion, noise and crosstalk which significantly improves reception and broadens the choice of antenna.
Sensor extension module
SIGNALlab 250-12
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost.
The device has full software control over the hardware and additional hardware features compared to other Red Pitaya products. Its larger Xilinx Zynq 7020 FPGA enables greater real-time processing capabilities plus a faster 250Msps sampling rate, and just like other Red Pitaya products it offers the benefits of remote access, with an online app user interface accessible through Ethernet or Wi-Fi.
SIGNALlab 250-12 OEM
This OEM version is best suited for cases where a fast digitizer needs to be integrated into bigger projects.
SIGNALlab 250-12 is the most sophisticated Red Pitaya digitizer, built for more demanding industrial applications and research, where robustness and performance matter more than cost.
This multi-purpose measurement device is designed to enhance your testing and prototyping capabilities while significantly reducing costs.
With its open-source measurement tools, the SIGNALlab 250-12 offers a range of features to meet your requirements. It allows for remote control and measurement, providing convenience and flexibility.
What is in the box:
– Red Pitaya SIGNALlab 250-12 digitizer board
SIGNALlab 250-12 Standard Kit
Introducing the Red Pitaya SIGNALlab 250-12, a versatile and powerful digitizer for your lab needs.
This multi-purpose measurement device is designed to enhance your testing and prototyping capabilities while significantly reducing costs. With its open-source measurement tools, the SIGNALlab 250-12 offers a range of features to meet your requirements. It allows for remote control and measurement, providing convenience and flexibility.
SIGNALlab 250-12 is the most sophisticated Red Pitaya digitizer, built for more demanding industrial applications and research, where robustness and performance matter more than cost. Upgrade your lab with the Red Pitaya SIGNALlab 250-12 and unlock a world of possibilities. Enhance your testing capabilities and streamline your prototyping process with this innovative and efficient device.